Poly Aqua Products

TANK FEATURES

• Manufactured to comply with the following standards:- AS/NZS4020, AS 2070, AS/NZS 4766
• Manufactured from UV stabilised polyethylene, tanks are tough and durable and able to withstand the harsh Australian sun
• Tanks do not rust or corrode, are impact resistant and long lasting
• 10 Year Warranty
• Guaranteed one-piece tank construction ensures long term structural strength
• Food Grade polyethylene is used giving you fibre, taste and odour free drinking water

ALL TANKS SUPPLIED WITH

• Inlet strainer
• BSP Outlets
• Overflow
• Outlet strainer
• Taps (More than 2000L – 11/2” Outlet, 1” Gate Valve) (Less than 2000L – 3/4” Ball Valve)

TANK STAND FEATURES (To Suit Pt1050)

• Strong all galvanised steel
• Fully supports tank
• 500mm High

RAINWATER TANK INSTALLATION GUIDE

• The tank site must be flat and level, the area well compacted and free from any rocks, stones and sharp objects.
• Ensure that the prepared site is at least 600mm larger in diameter than the tank.
• A 75mm (3”) base of compacted crusher dust may be used as a tank pad. A reinforced concrete slab is also acceptable and must be greater than the diameter of the tank.
• If a material other than concrete is used, a retaining wall or surround must be provided to prevent erosion.
• The overflow must be piped well clear of the tank to avoid undermining of the tank base.
• Ensure that a flexible hose of at least 300mm (12”) is installed after the outlet valve to absorb any shocks or movement.

* NOTE:- FAILURE TO PROPERLY INSTALL TANK AS PER INSTRUCTIONS WILL VOID WARRANTY

AVAILABLE COLOURS
Heritage Green, Mist Green, Beige, Mountain Blue, Heritage Red, Light Grey, River Gum, Smooth Cream, Merino, Wheat

PT1000 Poly Rainwater Tank 1000L – 2050mm High x 900mm Diameter
PT1050 Poly Undereave Slimline Tank 1050L – 1560mm High x 750 Wide x 1300mm Long
PT3000 Poly Rainwater Tank 3000L – 2050mm High x 1450mm Diameter
PT5100 Poly Rainwater Tank 5100L – 1930mm High x 1950mm Diameter
PTJK Modular Tank Joiner Kit – Kit Includes 2 Joiner Tubes & 4 Seals (To suit PT1000 – 1000L Tank)
STS Tank Stand – 500mm High (To suit PT1050)
PC Pump Cover – 610mm Long x 520mm Wide x 680mm High

First Flush Water Diverters are a critical component of rainwater harvesting systems.

By preventing the first, most contaminated water from the roof they:

• Improve rainwater quality and safety
• Help extend the life of pumps (used to distribute rainwater for use)and internal appliances (such as hot water systems, washing machines, dishwashers, etc)
• Reduce tank maintenance The First Flush Water Diverters are simple to install and operate automatically to help prevent pollution of tank water.

WDDP01 – 90mm FIRST FLUSH WATER DIVERTER

The RainAid valve is designed to be connected to the mains water suply on a rainwater collection tank. It will provide a backup supply of water in the event household demand exceeds rain supply.

• Simple to install – no electrical supply required
• Ensures constant water supply to pressure system
• Standards approval for mains water connection

LTRA20 – RainAid Plastic Float Valve

BIA-INOX60PC Features

• 600W
• 240V
• Electronic Control
• Flows to 36 l/m
• Heads to 32m
• 3 to 4 Taps

BIA-JH400 Features

• 400W
• 240V
• Plastic Construction
• Flows to 125 l/m
• Heads to 8m